The 6013 is a general-purpose welding electrode made of mild steel and can be used in all positions of a welding process. The electrode delivers a smooth and medium penetrating arc. … The electrode is largely used for welding clean, new sheet metal.
What is a 6013 electrode?
DESCRIPTION: 6013 is a high titanic coated electrode. … As a result, 6013 is an all- purpose electrode that provides a soft steady arc which is easily regenerated, easy slag control for vertical-down welding, low spatter and a beautiful bead appearance.
What’s the difference between 6013 and 7018 welding rod?
Higher numbers mean the rod has more coating. A 7018 rod will have more coating, while a 6013 rod will have less coating.
Is 6013 an ac or dc Rod?
The 6013 rods are all-position AC or DC polarity for welding new, clean sheet metal applications because they penetrate less but don’t burn through the metal. The 7018 welding rods are used for pipe welding and structural steel welding and repair welding.
Is 6013 a drag rod?
“6013 is an AC-capable rod, but if I were to use it DC, I’d go electrode negative for the extra penetration, since 6013 is not a deep-penetration rod in AC mode.”
Do you drag 6013?
7024 is a common drag rod but is very liquidy and used for flat and very limited horizontal welding. 7018 is even more common and that rod can be dragged with great weld quality in flat (1F) Horz.
Is 6013 All position?
The 6013 is a general-purpose welding electrode made of mild steel and can be used in all positions of a welding process. The electrode delivers a smooth and medium penetrating arc. … The electrode’s quick freezing slag provides optimum performance while welding in the vertical down position.
What is the strongest welding rod?
Metal Web News claims that 6011 welding rods are capable of producing welds that feature a 60,000 psi minimal tensile strength. The 7018 welding rods produce stronger welds that feature minimal tensile strengths of 70,000 psi.
What is 7018 rod used for?
The 7018 arc welding rod is commonly used for general-purpose welding of carbon steel. It is a mild steel rod that is coated with a low-hydrogen, iron-based flux compound that vaporizes to shield the molten weld bead from contamination by air and moisture. This rod has a tensile strength of 70,000 lbs.
What is the easiest welding rod to use?
7018: All position electrode with a thick flux and high iron powder content, which makes it one of the easiest electrodes to use. These electrodes produce a smooth, quiet arc with minimal spatter and medium arc penetration.
How many amps does a 6013?
6013 Welding Rod Amperage Chart
|Electrode||Diameter (Inches)||Amperage Range|
Which is better AC or DC welder?
A smoother welding output than with AC. A more stable arc. Less spatter. DC negative offers faster deposition rates when welding thin sheet metals.
What is the best all around welding rod?
The best all-around welding rod would be the 6011, especially for the DIY’er and hobbyist. With 3/32 and 1/8 size rods on hand, the 6011 will get the majority of your jobs done. It is a fast-fill freeze rod, runs on both ac/dc and handles dirty contaminated jobs better than other electrodes.
Is 7018 Fast Fill?
With a Fast fill rod (7014 and I think 7024) one must move fast to lay down a bead. With Fill freeze ( 6012, 6013 and 7018 even though classified as a lo-hi rod) is between a fast freeze and fast fill.