What is the difference in gear ratio on a fishing reel?

Gear ratios determine the speed at which a reel picks up line. Fishing reels with a gear ratio of 6.3:1 means the spool rotates 6.3 times for every 360-degree turn of the reel handle. Baitcast reels offer a wider range of gear ratios than spinning models for spinning rods.

What is the best gear ratio for a fishing reel?

A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure.

What is a 7.5 1 gear ratio?

For example, a 7.5:1 gear ratio means that the spool rotates 7.5 times for every single turn of the handle. So, the higher the gear ratio, the faster the retrieve speed of your reel. … The table above covers the 3 main speed categories of baitcasting reels, plus the applications they are used for.

INTERESTING:  Is Fish Lake a volcano?

What is the best gear ratio for spinnerbaits?

Spinnerbaits: For spinnerbaits, a moderate retrieve reel of around 6.3:1 ratio will perform adequately. This speed allows for power to move larger bladed baits through the water, but also has the speed to burn in baits when need be.

What does a 6 4 1 gear ratio mean?

What Gear Ratios Tell You. Gear ratios in reels are simply an expression of how many times the reel spool turns each time you turn the reel handle. So a 6.4:1 ratio means that for every one revolution of the reel handle, the spool turns 6.4 times.

Is it better to have a higher or lower gear ratio?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential. This is known as the final drive, differential gear, Crown Wheel Pinion (CWP) or ring and pinion.

How do I choose the right gear ratio?

The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.

What gear ratio do I need for my baitcaster?

The most common reel on the market has a 6.4:1 gear ratio. This will allow you to work both fast moving presentations as well as slow. However, for certain techniques and applications, a very high or low gear ratio will often work best. For instance, burning a spinnerbait or buzzbait is best done with a 7.1:1 reel.

INTERESTING:  How do you clean a fish tank at home?

What is a good gear ratio for jig fishing?

Besides a high-speed reel, there are three other important factors to up the odds of success. When fishing bass jigs in heavy cover it is best to have the drag cranked almost all the way up.

Best Gear Ratio for Fishing a Jig.

Gear Ratio Inches of Recovery Per Turn (RPT)
5.1:1 21″
6.2:1 25″
7.5:1 31″
8.3:1 35″

How fast should I reel in a crankbait?

The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.

What is a medium-heavy rod good for?

A medium-heavy rod will allow you to fish Texas rigs, smaller jigs, spinnerbaits, vibrating jigs, topwater lures, crankbaits and much more without sacrificing hardly any performance.

What gear ratio is best for lipless crankbaits?

Some prefer a slower gear ratio (in the 5.4:1 to 6.1:1 range) to keep the bait in the strike zone longer, while others prefer a higher gear ratio (7.3:1) for long casts that allows for a fast retrieve as soon as the bait hits the water.

What do you use a medium action rod for?

Medium Action: A medium or moderate action rods will bend in the top half of their length, allowing an angler to fish both for small and large species with good control and hook setting allowances. These rods will allow a fisherman to fish in a wide range of situation and for a varied list of species.

INTERESTING:  How do Fangtooth fish survive?

What is the best gear ratio for inshore fishing?

Most inshore anglers agree that for inshore fishing, you will want a reel with a 6:1 gear ratio. What does this mean? It means that the spool will rotate exactly 6 times for every complete turn of your reel handle. A 5.6:1 or 6.4:1 would also be a great choice.

What is a 6 3 1 gear ratio?

Fishing reels with a gear ratio of 6.3:1 means the spool rotates 6.3 times for every 360-degree turn of the reel handle.

Big fishing