You asked: How do you make a rod pocket curtain?

How do you make a simple pocket rod curtain?

How to Sew Simple Rod Pocket Curtains: A Tutorial for Novices

  1. Step 1 – Hem the sides of your fabric panel. Fold over the side edges of your fabric to create 3/4 or 1 inch hems. …
  2. Step 2 – Hem the top of your fabric panel. …
  3. Step 3 – Create the pocket. …
  4. Step 4 – Hem the bottom of your fabric panel.

8.09.2014

How do you measure fabric for rod pocket curtains?

Measure from the bottom edge of the curtain rod to the required curtain length for the curtain body length. To the length, add a hem allowance of 6 inches, a top ruffle allowance of 2 inches, twice the rod pocket depth, and 1/2 inch. The total is the cut length of the fabric.

How do you make lined rod pocket curtains?

  1. Measure the circumference of the curtain rod.
  2. Install the curtain rod in it’s designated place on the window or wall. …
  3. Measure the width of the rod, from side to side inside the end brackets. …
  4. Cut the drape fabric equal to twice the width of the rod. …
  5. Turn the hem on the face fabric up 3 inches twice and press.
INTERESTING:  How much is a lifetime hunting and fishing license in Mississippi?

Is it cheaper to make your own curtains?

Y’all, custom curtains are not inexpensive. They are an investment! But they cost 1/3 less at Barn & Willow because they cut out the middleman and only operate online. But I’ll tell you, you get what you pay for!

How do you make rod pocket curtains without sewing?

Rings with clips are an amazingly chic and ultra-easy way to hang curtains, draperies, and valances without all the fuss of sewing. They slip right over a rod and slide back and forth easily, attaching to your fabric with small clips that hang off the rings.

What does 3 inch rod pocket mean?

Curtain Rod Pockets

Our Lace Window Treatments and Window Tiers usually have this size pocket. A 3 inch pocket will accept a 2 1/2 inch continental curtain rod or a 1 1/2 inch diameter round decorative rod. Most of our Curtains and Drapes have this size pocket. … Tabs and grommets do not hide the curtain rod.

What are rod pocket curtains?

The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. … Casement curtains are often used on French doors and sidelights.

How deep should rod pockets be?

A 1 ½” rod pocket should be used on a standard 1” curtain rod or with a decorative rod 13/16” diameter or smaller. A 3” rod pocket should be used on a standard 2 ½” continental or dauphine rod or on a decorative rod 1 3/8” – 1 ½ ” diameter.

INTERESTING:  Are moonshine rods good?

How wide should rod pocket curtains be?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

Do curtains come with rods?

Curtains do not typically come with curtain rods. You’ll need to pick out your curtains, and then find the rod that works for your budget, style, and type of curtain.

How much narrower should curtain lining be?

Your lining needs to be shorter and narrower than your main fabric. This is so that the main fabric will wrap around the back to create the return. The return is the border of fabric that you can see along each edge of the back of the curtain. Thermal lining should be cut 13cm (5⅛”) narrower than the main fabric.

How do I make simple lined curtains?

  1. Measure Curtain and Lining Panels. Use a tape measure to determine length from floor to desired height of curtain rod. …
  2. Fold and Press Hem. Place fabric on ironing board wrong-side-up. …
  3. Insert Weights and Sew Hem. …
  4. Hem Lining. …
  5. Create Header. …
  6. Sew Sides. …
  7. Sew Header. …
  8. Pleat and Hang Panels.
Big fishing